This
XR 18V cordless angled nailer from
DeWalt features brushless motor technology, offering the power to fire a 90mm ring shank nail into soft wood and 63mm into hard woods. It has increased visibility and durability, along with protection for work surfaces from the non-mar contact-tip.
The nailer's sequential operating mode allows for precision placement, while the bump operating mode provides the user with production speed. Mechanical rather than gas operation offers consistent performance at temperatures between -15 and 50 °C, plus minimal cleaning/service requirements. A versatile 30-34° magazine angle will accept most clipped head, and off centre round head paper tape collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster, and tool-free stall/jam clearance minimises user down time.
The ergonomic design of the machine allows the nailer to fit easily between a 400mm centre stud, and its cordless design allows work without the inconvenience and safety risk of trailing leads. Gas free operation offers a significant saving in running costs.
For user protection, the DCN690 has class leading vibration and sound figures. A reversable belt/rafter hook povides increased portability and versatility on the job-site. For safety, the dry fire lockout ensures the tool is protected from firing without nails in the magazine.
Suitable for many applications, including stud wall insulation, roofing, roof battening, floor board installation etc.
- Input power: 18V
- Impact energy: 105 Joules
- Magazine angle: 30-34°
- Nail Ø: 2.8-3.3mm
- Nail length: 50-90mm
- Magazine capacity: up to 55 nails
- Firing mode: bump and sequential
- Weight: 3.53kg
- Manufacturer's part DCN690N-XJ
Supplied as a naked unit, batteries and charger NOT supplied.
| Type |
Nailer |
| Length |
90mm |
| Pack Size |
N/A |
