The Block PEL 230/12-2 is a Primary Switch Mode DIN Rail Power Supply, that concentrates on the core task of voltage and current supply. This Single-Phase PSU has a flat step profile optimised for installation in control panels in the building automation.
- Stabilised and adjustable output voltage
- DC OK signalling via LEDs
- Parallel connection option
- Service-friendly spring-loaded connector system
- Panel installation on mounting rails
- Input rated voltage: 100 to 240V AC
- Input voltage range: 85 to 264V AC (120 - 373V DC)
- Input rated current: 0.7/ 0.4A (110/ 230V AC)
- Rated frequency range: 44 to 66Hz
- Starting current limiter: <30A, NTC
- Input fuse internal: 2A (slow-blow)
- Recommended back-up fuse: 6A, 10A, 16A, characteristics B, C
- Mains buffering: 10/ 80ms
- Transient surge voltage protection: Varistor
- Output voltage range: 10.5 to 15.5V DC
- Output rated current: 2A
- Resistance to reverse feed: 25V DC
- Overload behaviour: Constant current
- Ripple factor typical: 100mVss
- Parallel connection: Yes
- Serial operation: Yes
- Efficiency typ. 80 %
- Standards
- Classification: Primary switched mode power supply
- Supplied: Single Phase
- Supplied with 12V Output Voltage
- Manufacturer's part: Block PEL 230/12-2
| Input Voltage |
100 - 240 AC |
| Output Voltage |
24V |
| Output Current |
2.5 |
| No. of Outputs |
2 |
