The legacy wheel of the Ksyrium Family now gets wider rims and a stepped-up finish for an improved ride quality
The Ksyrium Pro has set new standards for modern wheel building. It’s equally at ease on fast rolling terrain or mountain courses and for a couple of hours or an all-day adventure.
Enhanced rim design
We’re bringing in a new rim shape which is enlarged by two millimeters. That might not sound much but when combined with 25mm tires it increases the air volume by 18%. This extra volume means you can lower the tire pressure by 20 PSI while maintaining the same rolling resistance as with a narrower rim and tire. The result is greatly improved comfort with no compromise on rolling efficiency to keep you fast on the long haul. And despite the lower tire pressure the increased distance between the rim edge and the ground (thanks to the extra air) means pinch flats are easily avoided.
Trademark Ksyrium lightweight stiffness and durability
Everything else riders love about the Ksyrium Pro stays the same including the sweet combination of low weight stiffness and durability for unsurpassed ride quality. It’s thanks to key features adapted from the Ksyrium Pro SL:
- Zicral alloy spokes are stiffer stronger and lighter than traditional stainless steel spokes
- Isopulse lacing pattern (radial lacing on the drive side) allows a more balanced spoke tension giving a more stable and stiffer wheel especially for heavy loads
- Fore drilling creates the strongest possible connection between rim and spokes with no holes in the upper bridge of the rim to increase stiffness by about 20% and no rim tape needed (another 40g saved)
- And of course our new ISM4D rim means each part of the rim is precisely machined using just the right amount of material needed to provide stiffness and strength while maintaining weight at just 400g. For a total wheel weight of only 1475g.
Matching Yksion Pro tires
This wheel also comes with our Yksion Pro tires which offer a great balance of grip rolling resistance and a low weight of only 205g in 25mm thanks to the supple 127 TPI casing Kevlar beads and our well-balanced rubber compound. The front wheel comes with the Griplink version; with a specific tread pattern to evacuate water quickly when cornering increasing confidence and speed in difficult conditions. It also offers a very strong Kevlar puncture protection for added safety. The rear wheel comes with the Powerlink version; with a more supple polyamide puncture protection instead of Kevlar to lower rolling resistance. To reduce rolling resistance and increase speed even further the tread pattern is optimized to reduce the pressure on the ground. This also improves water evacuation from the center to increase traction and efficiency in wet conditions. Ksyrium Pro comes with 25mm tires. But Yksion Pro tires are also available in 28mm for an even better comfort.
RIM PROFILE
Ksyrium Pro 17C
TYRE
Casing: 127 TPI
Front and Rear Tread: Single Compound
Yksion Pro GripLink (front) & PowerLink (rear)
Dimension: 25-622 (700x25c)
Breaker: Front Kevlar Rear polyamide
VERSION
Clincher M11
Clincher ED11
INTENDED USE
Recommended tyre sizes: 25 to 32 mm
Max. Pressure: 25mm 7.7 bars - 110 PSI
ASTM CATEGORY 2 : road and offroad with jumps less than 15cm
For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels dont exceed 120kg bike included
VERSIONS
Color: Black only
COMPATIBILITY
Freewheel: Shimano/Sram convertible to Campagnolo with optional driver body
Front axle: Quick Release only
Rear axle: Quick Release only
RIMS
Weight reduction: ISM 4D
Height: front 24mm rear 26 asymmetrical
ETRTO size: 622x17C
Material: Maxtal
Joint: SUP
Brake track: UB Control
Drilling: Fore
Tyre: clincher
Valve hole diameter: 6.5 mm
Internal width: 17 mm
SPOKES
Shape: straight pull bladed front double butted
Material: Zicral
Count: front 18 rear 20
Lacing: front radial rear Isopulse
Nipples: Fore integrated aluminum
HUBS
Freewheel: FTS-L steel
Adjustable sealed cartridge bearings
Rear body: aluminum
Front body: carbon with aluminum flanges
Axle material: aluminum
DELIVERED WITH
Multifonction adjustment wrench
BR601 quick releases
Please be aware that the images and description above are usually supplied by the brand / manufacturer and are in no way affiliated with Cycle Centre Congleton Limited T/A CycleStore. Cycle Centre Congleton Limited T/A CycleStore only resell items from third parties and do not design or manufacture any products.
HOME 
