Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile
 +44 (0)1206 751166

TruSens PIP-T8L-101 2mm PNP N/O M8 Long Inductive Sensor Connector Out

Order Code:  

78-4118

  Copy to clipboard
Brand: TruSens  Copy to clipboard MPN: PIP-T8L-101 Copy to clipboard
 Report an error

Discontinued

This inductive sensor comes in a long cylindrical M8 housing and has a mounting distance of 1mm. The body is chrome-plated brass that is proof against water, oil, acid and alkaline. An LED indicator lamp is provided for status indication. Widely used in counting, measuring, RPM measuring applications in chemical, paper manufacturing, and other industries.


  • Output configuration PNP NO
  • Straight plug-in connector output
  • Sensing distance 0 to 0.08mm
  • Power supply 10 to 30V DC
  • Ferrous metals standard sensing object
  • Overcurrent protection
  • Reverse polarity protection
  • Short circuit protection
  • IP67 Protection
  • Installation instructions supplied (in box)
Sensing Range 0 to 0.9mm
Switching Voltage AC N/A
Switching Voltage DC 10 to 30V
Switching Current 200mA
Output Configuration PNP NO
Contact Rating N/A

Reviews


Basically OK

Reviewed by: Mr David Valentine - 21 October 2016
I have run the switch at room temperature only and only a smooth supply, well within tolerance. As expected the switch works within specification. There are 4 places around the periphery where the status LED shows. A nice touch so you can see the status from any direction. However, a note of caution. The LED intensity is different on each viewpoint. so you can end up thinking it is dim and go hunting for non existent problems!